P stc-2002, Deposition controller y – INFICON STC-2002 Thin Film Deposition Controller Operating Manual User Manual

Page 173

background image

p STC-2002

DEPOSITION CONTROLLER

y

SECTION 5.XX

e page 171 of 276 ^

The 5 key type menus are shown immediately below.

Token keys (logical operators, command function/ID# combinations)

IN:

Used to input a variable. This can be used on any of the states. The current state of the
variable will be pushed on the stack when the term is processed or scanned. When inputing
from scalar (as in softnode use) the stack result is scalar. When inputing from Boolean or
event, the result on the stack is Boolean.

OUT:

Used to output to an output or user definable soft node. If an Out is specified to a read only
state (an Input for example), an error message will appear on the display. The term being
scanned causes the top of the stack to be popped and sent to the output. When going to scalar

2

nd

of 5

Edit/Change

menu types

3

rd

of 5

Edit/Change

menu types

1

st

of 5

Edit/Change

menu types

EDT/CHG
or simply

CHG (change)
MENUs

4

th

of 5

Edit/Change

menu types

5

th

of 5

Edit/Change

menu types