KORG TRITON STUDIO music workstation - Manual (Page 68)

58
6.1–2: MIDI I/O
Specifies the MIDI input/output channels for the four
KARMA modules used by the combination.
MIDI data from the keyboard or from MIDI IN that matches
the MIDI input channel specified for a KARMA module will
be input to that KARMA module. (See the diagram below,
“KARMA-MIDI Input/Output Channel.”)
MIDI data will be transmitted from a KARMA module on
the MIDI output channel specified for that KARMA module,
and will sound timbres that match that channel.
6.1–2a: Input Channel, Output Channel, T.Thru
(KRM Off)
A/B/C/D Input Channel [01...16, Gch]
Specifies the MIDI input channel for each KARMA module.
MIDI data from the keyboard or from MIDI IN that matches
the specified MIDI channel will be input to the KARMA
module.
Gch: The MIDI channel will always match the global MIDI
channel “MIDI Channel” (GLOBAL 2.1–1a). When using
KARMA with keyboard playing in Combination mode, you
will normally select Gch.
A/B/C/D Output Channel [01...16, Gch]
Specifies the MIDI output channel for each KARMA mod-
ule.
The MIDI data from the KARMA module will be transmit-
ted on the specified MIDI channel, and will sound timbres
whose channel matches.
Gch: The MIDI channel will always match the global MIDI
channel “MIDI Channel” (GLOBAL 2.1–1a).
KARMA Routing Map
This shows the timbres that will be sounded by each
KARMA module, according to the MIDI output channel set-
tings of each KARMA module and the MIDI channel of each
timbre (3.1–1a).
Timb Thru (T.Thru (KRM Off)) [Off, On]
“Input Channel” and “Output Channel” settings are nor-
mally valid only when the KARMA [ON/OFF] key is on.
As an exception, “Timb Thru” specifies whether MIDI data
that has passed through the KARMA module will be sent
(Thru) to timbres when the KARMA [ON/OFF] key is off.
On (checked): When the KARMA [ON/OFF] key is off,
MIDI data that has passed through the KARMA module will
be sent via the “Output Channel” to timbres.
Off (unchecked):
When the KARMA [ON/OFF] key is off,
MIDI data that has passed through the KARMA module will
not be sent to timbres.
If you wish to apply separate phrases or patterns by using
KARMA module [A] for timbre 1 and KARMA module [B],
set the MIDI channels as follows.
[Example setting 1]
1 Set the global MIDI channel “MIDI Channel” (GLOBAL
2.1–1a) to 01.
2 Set timbre 1 as follows.
“Program Select”: Bass program
“MIDI Channel” (3.1–1a): Gch
3 Set timbre 2 as follows.
“Program Select”: Piano program
“MIDI Channel” (3.1–1a): 02
4 Set KARMA module [A] as follows.
“GE Select”: A riff of GE category Bass
“Input Channel”: Gch
“Output Channel”: Gch
“Timb Thru”: Off
5 Set KARMA module [B] as follows.
“GE Select”: A riff of GE category Keyboard
“Input Channel”: Gch
“Output Channel”: 02
“Timb Thru”: Off
6 Turn the KARMA [ON/OFF] key on.
When you play the keyboard, KARMA module [A] will
play the bass of timbre 1, and KARMA module [B] will
play the piano of timbre 2. (See “KARMA ON/OFF=ON
(1)(2)” in the diagram at the bottom of the next page.)
6.1–2a
6.1–2b
KARMA - MIDI Input / Output Channel
MIDI IN
Global MIDI Ch = 01
16ch
01ch Timbre 1
Timbre 2
Timbre 3
Timbre 4
Timbre 5
Timbre 6
Timbre 7
Timbre 8
01ch
01ch
01ch
02ch
02ch
03ch
04ch
01ch
KARMA Module [A] In : 01ch Out : 01ch
KARMA Module [D] In : 16ch Out : 04ch
KARMA Module [C] In : 01ch Out : 03ch
KARMA Module [B] In : 01ch Out : 02ch
KARMA ON/OFF = ON