KORG TRITON STUDIO music workstation - Manual (Page 133)

S.PLA
Y
1.1
2.2
2.3
3.1
4.1
4.2
6.1
6.2
6.3
6.4
7.1
7.2
7.3
123
6.1–1b: GE Name, Run Check Box, Solo Check Box
GE Name
This displays the name of the GE selected in “GE Select.”
Run Check Box [Off, On]
The KARMA module(s) that are On (checked) will operate.
Solo Check Box [Off, On]
Check this when you wish to verify the operation of a spe-
cific KARMA module when the KARMA function is run-
ning.
☞ p.47 COMBI 1.1–4b: Setup, Solo Check Box
This will be cleared if you temporarily exit the mode.
6.1–1c: Selected GE Information, Init K.RTC
This displays information on the KARMA module ([A], [B],
[C], [D]) that is currently selected for editing.
GE No., GE Name
☞ p.47 COMBI 1.1–4c: Setup, “GE No., GE Name”
MIDI In/Out Ch
☞ p.47 COMBI 1.1–4c: Setup, MIDI In/Out Ch
These settings are made in S.PLAY 6.1–2: MIDI I/O, “Input
Channel” and “Output Channel” (6.1–2a).
Init K.RTC (KARMA Real-time Controls-Use GE’s Value)
[Off, On]
☞ p.47 COMBI 1.1–4c: Setup “Init K.RTC”
■ 6.1–1d: UTILITY
☞ “GM Initialize” (1.1–1b)
“Solo Selected Track,” “Set Location” (SEQ 1.1–1d)
“Copy KARMA Module” (PROG 6.1–1c), “Select by Cate-
gory” (PROG 1.1–3b)
“Init KARMA Module” (COMBI 6.1–1d)
6.1–2: MIDI I/O
Specifies the MIDI input/output channels for the four
KARMA modules used in Song Play mode.
MIDI data from the keyboard or the MIDI IN connector that
matches the MIDI input channel specified for a KARMA
module will be input to that KARMA module.
The MIDI data from each KARMA module will be transmit-
ted on the MIDI output channel specified for that KARMA
module, and will be sounded by the track of the matching
channel.
6.1–2a: Input Channel, Output Channel, KARMA
Routing Map, T.Thru (KARMA Off)
A/B/C/D Input Channel [01...16, Tch]
A/B/C/D Output Channel [01...16, Tch]
☞ p.104 SEQ 6.1–2a: MIDI I/O “A/B/C/D Input Channel,”
“A/B/C/D Output Channel”
Tch: Automatically match the MIDI channel to the MIDI
Channel of the track selected by “Play (Track Select” (1.1–
1c). (Tracks 01–16 are fixed at MIDI channels 1–16.)
[Example 1]
With the following settings, switching “Play (Track Select)”
(the track you yourself will play) to switch programs will
also switch the KARMA module simultaneously, causing a
different phrase to play. (See the diagram below.)
1 Set Track 1 (MIDI Channel: ch.1) as follows.
“Program Select”: a Guitar category program
2 Set Track 2 (MIDI Channel: ch.2) as follows.
“Program Select”: a Bass category program
3 Set KARMA module [A] as follows.
“GE Select”: a riff of GE category Guitar
“Input Channel”: 01
“Output Channel” 01
6.1–2a
6.1–2b
KARMA Module [A] In : 01ch Out : 01ch
KARMA Module [B] In : 02ch Out : 02ch
KARMA ON/OFF = ON
Track 01: Guitar In : 01ch
Track 02: Bass In : 02ch
Play Track = Track 01
Play Track = Track 02
01ch
02ch
Guitar Riff
Bass Riff
Example 1