KORG TRITON STUDIO music workstation - Manual (Page 207)

Ef
fect
197
a: BPM, a: Rhythm
With the tempo specified by the “BPM” parameter (or the MIDI
Clock tempo if “BPM” is set to MIDI), the length of one beat
equals the feedback delay time, and the interval between taps
becomes equal. Selecting a rhythm will automatically turn the tap
outputs on and off. When “BPM” is set to MIDI, the lower limit of
the “BPM” is 44.
Reverb effects
These effects simulate the ambience of reverberation in con-
cert halls.
052: Rev Hall
(Reverb Hall)
This hall-type reverb simulates the reverberation of mid-size
concert halls or ensemble halls.
053: Rev SmoothHall
(Reverb Smooth Hall)
This hall-type reverb simulates the reverberation of larger
halls and stadiums, and creates a smooth release.
054: Rev Wet Plate
(Reverb Wet Plate)
This plate reverb simulates warm (dense) reverberation.
055: Rev Dry Plate
(Reverb Dry Plate)
This plate reverb simulates dry (light) reverberation.
c: Pre Delay, d: Pre Delay Thru
The “Pre Delay” sets the delay time to the reverb input, allowing
you to control spaciousness.
Using the “Pre Delay Thru” parameter, you can mix the dry sound
g
HiDamp (High Damp)
Sets the damping amount in the high range 0...100%
☞
Fx:043
LoDamp (Low Damp)
Sets the damping amount in the low range 0...100%
☞
Fx:043
h
InLvl Mod (Input Level Mod [%]) –100...+100
Sets the modulation amount of the input level
☞
Fx:037,
Src (Source)
Selects the modulation source for the input level Off...Tempo
☞
Fx:037
i
W/D (Wet/Dly) Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
Reverb
a
Reverb Time
Sets the reverberation time 0.1...10.0s
b
High Damp
Sets the damping amount in the high range 0...100%
c
Pre Delay
Sets the delay time from the dry sound 0...200ms
☞
d
Pre Delay Thru
Sets the mix ratio of non-delay sound 0...100%
☞
e
Pre EQ Trim
Sets the EQ input level 0...100
f
LoEQ (Pre Low EQ Gain)
Sets the gain of Low EQ –15...+15dB
HiEQ (Pre High EQ Gain)
Sets the gain of High EQ –15...+15dB
g
W/D (Wet/Dly) Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
LEQ HEQ
Pre Delay Reverb
Pre Delay Thru