KORG TRITON STUDIO music workstation User Manual

Page 109

7.1

7.2

7.3

1.1

1.2

2.1

2.2

2.3

3.1

3.2

3.3

3.4

4.1

4.2

4.3

4.4

5.1

5.2

6.1

6.2

6.3

6.4

SEQ

Insert Measure

This command inserts the specified number of measures
into the specified track. When you execute the Insert Mea-
sure command, the musical data following the insert loca-
tion will be moved backward.
If musical data is inserted into an area across which note
data has been tied, a note-off will be created immediately
before the inserted measure, and the subsequent portion of
the note will be deleted.

In “Track Select,” specify the track into which you wish
to insert.

Select “Insert Measure” to access the dialog box.

In “At Measure,” specify the measure location at which
the data will be inserted. (The measure you specified in
Track Edit page “Measure (From)” will be set as a
default.)

In “Length,” specify the number of measures that will be
inserted.

In “Meter,” specify the time signature of the measures
that will be inserted.
If you want the inserted measures to match the existing
time signature, specify */*. With any setting other than */*,
the time signature of the inserted measures will change,
and the specified time signature will apply to all tracks
for those measures.

If you wish to insert measures into all tracks including
the master track, check “All Tracks.” The musical data
following the inserted measures will playback in the
same way it did before the measures were inserted.
If “All Tracks” is unchecked, the measures will be
inserted into the specified track. At this time, the musical
data following the inserted location will be moved back-
ward by the number of measures that were inserted.
However, the time signature and tempo will not move.

To execute the Insert Measure command, press the [F8]
(“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Repeat Measure

This command repeatedly inserts the specified measures for
the specified number of times. When you execute the Repeat
Measure command, the measures will be inserted following
the measure specified by “To End of Measure,” and musical
data following the inserted data will be moved backward. It
is convenient to use this command when you have a song
that you playback with “Track Play Loop” (1.2–1(2)a) turned
on, and wish to expand it into musical data.

Use “Track Select” to select the track whose measures
you wish to repeat.

Select “Repeat Measure” to access the dialog box.

In “From Measure” and “To End of Measure,” specify the
range of measures that will be repeated. (By default,
“From Measure” and “To End of Measure” will be set to
the range you specified in the Track Edit page.)

In “Times,” specify the number of repetitions. For exam-
ple if you set “From Measure” to 001, “To End of Mea-
sure” to 004, and “Times” to 2, the musical data of
measures 1–4 will be inserted into measures 5–8. The
result will be that measures 1–4 will be played twice.

If you wish to repeat the musical data of all tracks includ-
ing the master track, check “All Tracks.”

To execute the Repeat Measure command, press the [F8]
(“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Copy Measure

This command copies measures of musical data from the
copy source to the specified measure location.
When you execute the Copy Measure command, the track
data at the copy destination will be rewritten.

Select the copy source song.

Select “Copy Measure” to access the dialog box.

In “From: Track,” select the copy source track. (By
default, this will be the track you selected in “Track
Select.”)
If you check “All Tracks,” the musical data of all tracks
including the master track will be copied.

In “From Measure” and “To End of Measure,” specify the
range of copy source measures. (By default, “From Mea-
sure” and “To End of Measure” will be the range that you
specified in the Track Edit page.)

Time signature = */*

Track 2

5 (2/4)

4 (5/4)

1 (4/4)

2 (7/8)

3 (7/8)

1 (4/4)

2 (4/4)

4 (5/4)

5 (2/4)

3 (3/4)

1 (4/4)

2 (4/4)

4 (5/4)

5 (2/4)

3 (3/4)

1 (4/4)

2 (7/8)

4 (5/4)

5 (2/4)

3 (7/8)

Track 2

5 (2/4)

4 (5/4)

Track 2

1 (4/4)

2 (4/4)

1 (4/4)

2 (4/4)

4 (5/4)

5 (2/4)

3 (3/4)

1 (4/4)

2 (4/4)

4 (5/4)

5 (2/4)

3 (3/4)

1 (4/4)

2 (4/4)

4 (5/4)

5 (2/4)

3 (3/4)

Track 1

Track 2

Track 1

Time signature = 7/8

Before Insert

After Insert

Before Insert

After Insert

Insert two measures

Measures 4 and 5 will use the previously specified
time signature.

Measures 2 and 3 will be 7/8, and measures 4 and 5
will be the previously specified time signature.

Track 1

Before
Repeat
Measure

After
Repeat
Measure

If you execute the Repeat Measure operation on measures 1–4 with “Time” = 2,
measures 1–4 will be inserted into measures 5–8.