KORG TRITON STUDIO music workstation - Manual (Page 129)

S.PLA
Y
1.1
2.2
2.3
3.1
4.1
4.2
6.1
6.2
6.3
6.4
7.1
7.2
7.3
119
1 Select Song Play mode.
2 The position of knob 1 at the time you entered Song Play
mode will be the center (64).
At this time, the knob 1 graphic will show
.
3 Turn knob 1 all the way to the right (127).
The knob 1 graphic will be highlighted as
.
4 Select a different mode.
Temporarily exit Song Play mode.
5 Select Song Play mode once again.
6 The knob 1 setting will be the far right setting (127). The
knob 1 graphic will be
.
In Song Play mode, it is not possible to use the “Restore
entire program
” operation that is available in Program
and Combination modes. You can use the “Restore
only SCENE settings
” and “Restore only knob and
switch settings ” operations to revert to the settings at
the time the mode was selected. ( ☞ p.6 Program mode
“Restoring only SCENE settings,” “Restoring only the
knob and switch settings.”)
■ 1.1–7b: UTILITY
☞ “GM Initialize” (1.1–1b), “Solo Selected Track,” “Load
Template Song,” “Save Template Song,” “Set Location”
(SEQ 1.1–1d)
Specifies the functions that the [SW1] key, [SW2] key, and
the B-mode functions of the REAL-TIME CONTROL knobs
[1]–[4] will have in Song Play mode. The functions you spec-
ify can be used when playing the track selected by “Play
(Track Select)” (1.1–1a).
If the track you select in “Track Select)” (1.1–1a) has a
“Status” (3.1–1(2)a) setting of either BTH or EXT, oper-
ating a controller that has been assigned a CC# will
cause MIDI control change (CC#) messages to be trans-
mitted on the MIDI channel of that track.
2.2–1: Ctrls
(Controls)
2.2–1a: Knob B-Assign
Assigns the B mode functions (mainly various types of con-
trol change) for the front panel REAL-TIME CONTROL
knobs [1]–[4] (
☞ p.231 “Realtime Control Knobs B Assign
List”).
The functions you specify here will operate when the front
panel REAL-TIME CONTROL knobs [1]–[4] are operated in
B-mode.
Since the REAL-TIME CONTROL knobs [1]–[4] B mode
functions of the program assigned to each track will not
be valid, you can make new settings here.
Knob1–B (Knob1–B Assign) [Off...MIDI CC#95]
Knob2–B (Knob2–B Assign) [Off...MIDI CC#95]
Knob3–B (Knob3–B Assign) [Off...MIDI CC#95]
Knob4–B (Knob4–B Assign) [Off...MIDI CC#95]
☞ p.10 PROG 2.2–1a: “Knobs B-Assign.”
2.2–1b: SW1/2 Assign
Assigns the functions of the front panel [SW1] and [SW2]
keys (
☞ p.230 “SW1, SW2 Assign List”).
Since the [SW1] and [SW2] functions of the program
assigned to each track will not be valid, you can make
new settings here.
SW1 (SW1 Assign) [Off, ..., AfterT Lock]
Toggle/Momentary [Toggle, Momentary]
SW2 (SW2 Assign) [Off, ..., AfterT Lock]
Toggle/Momentary [Toggle, Momentary]
☞ p.10 PROG 2.2–1a: “SW1/2 Assign.”
■ 2.2–1c: UTILITY
☞ “GM Initialize” (1.1–1b), “Solo Selected Track,” “Load
Template Song,” “Save Template Song,” “Set Location”
(SEQ 1.1–1d)
2.3–1: MOS..8
(MOSS T01...08)
2.3–2: MOS..16
(MOSS T09...16)
This page is displayed when the separately sold EXB-MOSS
option has been installed.
(
☞ EXB-MOSS owner’s manual & p.269 “EXB-MOSS
option”)
S.PLAY 2.2: Controller
2.2–1a
2.2–1c 2.2–1b
S.PLAY 2.3: MOSS