KORG TRITON STUDIO music workstation - Manual (Page 53)

43
COMBI
1.1
2.1
2.2
2.3
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4.4
6.1
6.2
6.3
6.4
7.1
7.2
7.3
2. Combination mode
For details on how to select pages in Combination mode,
refer to p.1. In this display page you can select and play Combinations.
1.1–1: Combi
(Combination)
1.1–1a: Bank, Combi Select, Category, Cat.Hold,
10’s Hold, (Tempo)
Bank (Bank Select) [Bank A…F]
This is the Combination bank display.
Use the front panel BANK [A]–[F] keys to select the bank.
On this instrument, there are a total of 768 combination pro-
grams in four rewritable banks (A, B, C, D, E, F), each con-
taining 128 combinations.
If you have selected the “Program Select” (1.1–2c) edit
cell for a timbre 1–8 in the Prog page, Bank [A]–[G] will
switch the program banks for timbres 1–8.
Combi Select (Combination Select) [0...127: name]
Here you can select a combination. Select this parameter,
and use the VALUE [
], [ ] keys, numeric keys [0]–[9], or
the [VALUE] dial to select a combination. You can also select
combinations by category, or using “10’s Hold.” (
☞ p.2
”Select by Category,” “Cat.HOLD,” “10’s HOLD”)
You can select programs by transmitting MIDI program
changes from a connected external MIDI device, or by
using a foot switch. (
☞ p.145 “Foot SW Assign” (GLO-
BAL 6.1–1a, ☞ p.232 “Foot Switch Assign List”)
COMBI PAGE MENU
Play 1.1: Play Select and play combinations. Select a
program for each timbre, and set sta-
tus, pan, and level. KARMA GE selec-
tion, Run/Solo settings. (
☞
p.43)
P/M 2.1: Ed-Prog/Mix Select a program for each timbre, and
set pan and level. (Same as the 1.1:
Play parameters; can be edited from
either page.) (
☞
p.48)
Ctrl 2.2: Ed-Ctrl Controller settings. (
☞
p.49)
MOSS 2.3: Ed-MOSS Displayed if the separately sold EXB-
MOSS option is installed. Set EXB-
MOSS parameters. (
☞
p.49)
Prm1 3.1: Ed-Param1 MIDI, OSC, and Pitch settings for each
timbre. (
☞
p.49)
Prm2 3.2: Ed-Param2 Enable timbre sounding by KARMA
ON/OFF, delay and scale settings for
each timbre. (
☞
p.51)
KeyZ 3.3: Ed-Key Zone Key zone settings for each timbre.
(
☞
p.52)
VelZ 3.4: Ed-Vel Zone Velocity zone settings for each timbre.
(
☞
p.53)
MIDI1 4.1: Ed-MIDI Filter1 MIDI message transmission/reception
filter settings for each timbre, such as
Prog Change and After Touch. (
☞
p.54)
MIDI2 4.2: Ed-MIDI Filter 2 Filter settings such as JS and Ribbon
Ctrl. (
☞
p.55)
MIDI3 4.3: Ed-MIDI Filter 3 Filter settings; Real-time Control Knob
(
☞
p.55)
MIDI4 4.4: Ed-MIDI Filter 4 Filter settings; SW, Other Ctrl Change
(
☞
p.56)
KARM 6.1: Ed-KARMA KARMA GE selection and settings,
mixer channel, key zone parameters,
MIDI filter settings. (
☞
p.57)
K Mdl 6.2: Ed-KARMA Mdl Module parameter settings (transpose,
range of generated phrase, trigger etc.)
(
☞
p.61)
K GE 6.3: Ed-KARMA GE GE parameter settings and assign-
ments to KARMA real-time Controls.
(
☞
p.62)
K RT 6.4: Ed-KARMA RT KARMA RT parameters, Dynamic MIDI
settings. (
☞
p.63)
BUS 7.1: Ed-BUS Bus and master effect send level set-
tings for each timbre. (
☞
p.65)
IFX 7.2: Ed-InsertFX Insert effect routing, selection, and set-
tings. (
☞
p.66)
MFX 7.3: Ed-MasterFX Master effect selection and settings.
Master EQ settings. (
☞
p.67)
COMBI 1.1: Play
Bank A, B Preloaded combinations
Bank C, D EXB-PCM series combinations, User combina-
tions
Bank E Preloaded combinations
Bank F User combinations, EXB-PCM series combina-
tions
1.1–1a
1.1–1b
1.1–1c