2 ia32_cr_pat msr – Intel IA-32 User Manual
Page 482
10-42 Vol. 3A
MEMORY CACHE CONTROL
10.12.2 IA32_CR_PAT MSR
The IA32_CR_PAT MSR is located at MSR address 277H (see to Appendix B, “Model-Specific
Registers (MSRs),” and this address will remain at the same address on future IA-32 processors
that support the PAT feature. Figure 10-7 shows the format of the 64-bit IA32_CR_PAT MSR.
The IA32_CR_PAT MSR contains eight page attribute fields: PA0 through PA7. The three low-
order bits of each field are used to specify a memory type. The five high-order bits of each field
are reserved, and must be set to all 0s. Each of the eight page attribute fields can contain any of
the memory type encodings specified in Table 10-10.
Figure 10-7. IA32_CR_PAT MSR
Note that for the P6 family processors, the IA32_CR_PAT MSR is named the PAT MSR.
31
27
26
24
23
19
18
16
15
11
10
8
7
3
2
0
Reserved
PA3
Reserved
PA2
Reserved
PA1
Reserved
PA0
63
59
58
56
55
51
50
48
47
43
42
40
39
35
34
32
Reserved
PA7
Reserved
PA6
Reserved
PA5
Reserved
PA4
Table 10-10. Memory Types That Can Be Encoded With PAT
Encoding
Mnemonic
00H
Uncacheable (UC)
01H
Write Combining (WC)
02H
Reserved*
03H
Reserved*
04H
Write Through (WT)
05H
Write Protected (WP)
06H
Write Back (WB)
07H
Uncached (UC-)
08H - FFH
Reserved*
NOTE:
* Using these encodings will result in a general-protection exception (#GP).