Intel IA-32 User Manual

Page 378

9-4 Vol. 3A

PROCESSOR MANAGEMENT AND INITIALIZATION

MXCSR

Pwr up or Reset: 1F80H
INIT: Unchanged

Pentium III processor only-
Pwr up or Reset: 1F80H
INIT: Unchanged

GDTR, IDTR

Base = 00000000H
Limit = FFFFH
AR = Present, R/W

LDTR, Task
Register

Selector = 0000H
Base = 00000000H
Limit = FFFFH
AR = Present, R/W

DR0, DR1, DR2,
DR3

00000000H

DR6

FFFF0FF0H

DR7

00000400H

Time-Stamp
Counter

Power up or Reset: 0H
INIT: Unchanged

Perf. Counters
and Event Select

Power up or Reset: 0H
INIT: Unchanged

All Other MSRs

Pwr up or Reset:
Undefined
INIT: Unchanged

Data and Code
Cache, TLBs

Invalid

Fixed MTRRs

Pwr up or Reset: Disabled
INIT: Unchanged

Not Implemented

Variable MTRRs

Pwr up or Reset: Disabled
INIT: Unchanged

Not Implemented

Machine-Check
Architecture

Pwr up or Reset:
Undefined
INIT: Unchanged

Not Implemented

APIC

Pwr up or Reset: Enabled
INIT: Unchanged

NOTES:

1. The 10 most-significant bits of the EFLAGS register are undefined following a reset. Software should

not depend on the states of any of these bits.

2. The CD and NW flags are unchanged, bit 4 is set to 1, all other bits are cleared.

3. Where “n” is the Extended Model Value for the respective processor.

4. If Built-In Self-Test (BIST) is invoked on power up or reset, EAX is 0 only if all tests passed. (BIST can-

not be invoked during an INIT.)

5. The state of the x87 FPU and MMX registers is not changed by the execution of an INIT.

Table 9-1. IA-32 Processor States Following Power-up, Reset, or INIT (Contd.)

Register

Pentium 4 and Intel Xeon
Processor

P6 Family Processor

Pentium Processor