Intel 4 - Manual

TeamStation™ System 4.0 and 4.0a
Installation & Use
System 4.0 Restore Procedure
Use the restore procedure to configure the Intel® TeamStation™ System to its
factory-installed configuration.
WARNING! This procedure will erase all of the files on the disk, including the Intel
TeamStation System directory of numbers, any documents stored on the system
with the Intel TeamStation Document Server, and any applications and their data.
You will need to copy files and data that you want to keep to diskette, network drive,
etc. before beginning the restore procedure.
NOTE: Only the System Administrator should perform the restore procedure. (This process takes approximately
two hours.)
To perform the system restore procedures have the following items ready:
1. Contents of the "System Restore Packet"
a. Intel TeamStation System Restore floppy diskette
b. Intel TeamStation System Restore CD
c. Intel TeamStation System Restore Procedures document
2. Microsoft Windows NT* 4.0 Workstation CD
3. Microsoft Windows NT* 4.0 Certificate of Authenticity (located on the cover of the Windows NT manual)
WARNING! This procedure will erase all of the files on the disk, including the Intel TeamStation System directory
of numbers, any documents stored on the system with the Intel TeamStation Document Server, and any
applications and their data. You will need to copy files and data that you want to keep to diskette, network drive,
etc. before beginning the restore procedure.
Before performing the Recovery Procedure:
1. Back-up on secondary storage any important data files that are on the hard disk. Note: The first step of
the recovery process is to format the hard disk which will erase all current data on the hard disk!
2. Have ready the Microsoft Windows NT* 4.0 Certificate of Authenticity (COA). This number is located on
the cover of the Windows NT 4.0 manual which came with the Intel TeamStation System. If you can not
locate the COA number, do the following before using the Recovery disks:
a. Right-click on the My Computer icon and select Properties.
b. On the General tab, record the number listed under the 'Registered to:' field. The format of this
number is XXXXX-OEM-XXXXXXX-XXXXX. This is the COA number that will be prompted for
during the recovery process.
3. Follow and complete the Intel TeamStation System Restore Procedures. If the Intel TeamStation System
4.0 Restore Procedures document cannot be located it can be downloaded.