Yaskawa Σ-V Series AC Servo Drives Rotational Motor MECHATROLINK-III - Manual (Page 54)

3.3 I/O Signal Allocations
3-17
3
Wirin
g and
Co
nnectio
n
Example of Changing Output Signal Allocations
The procedure to set the position completion signal (/COIN) that was previously disabled is allocated to CN1-
10 is shown below.
• Pn50E is changed from n.0000 to n.0002.
1. In the SigmaWin+ main window, click Parameters - Edit Parameters .
The Parameter Editing dialog box will appear.
MEC
HA