Yaskawa Σ-V Series AC Servo Drives Rotational Motor MECHATROLINK-III - Manual (Page 294)

9 Appendix
9.1.2 Parameters
9-12
Pn207
2
Position Control Function
Switch 0000 to
2210
− 0010 After restart Setup − −
Pn20A 4 Reserved (Do not change.) − − 32768 − − − −
Pn20E 4
Electronic Gear Ratio
(Numerator) 1 to
1073741824
1 1 After restart Setup − 4.4.3
Pn210 4
Electronic Gear Ratio
(Denominator) 1 to
1073741824
1 1 After restart Setup − 4.4.3
Pn22A 2 Reserved (Do not change.) − − 0000 − − − −
Pn230
2
Position Control
Expanded Function
Switch
0000 to
0001
– 0000 After reset Setup – 5.8.6
Pn231 4
Backlash Compensation
Value -50000 to
50000
0.1
refer-
ence
unit
0 Immediately Setup – 5.8.6
Pn233 2
Backlash Compensation
Time Constant
0 to 65536 0.01 ms 0 Immediately Setup – 5.8.6
Pn281 2 Reserved (Do not change.) − − 20 − − − −
Pn304 2 JOG Speed 0 to 10000 1 min -1 500 Immediately Setup − 6.3
Pn305 2
Soft Start Acceleration
Time
0 to 10000 1 ms 0 Immediately Setup − −
Pn306 2
Soft Start Deceleration
Time
0 to 10000 1 ms 0 Immediately Setup − −
(cont’d)
Parameter
No.
Size Name
Setting
Range
Units
Factory
Setting
When
Enabled
Classification Profile Reference
Section
4th 3rd 2nd 1st
digit digit digit digit
n.
MECHA
Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
/COIN Output Timing
Reference
Section
0 Outputs when the position error absolute value is the same or less than the position-
ing completed width (Pn522).
4.8.6
1 Outputs when the position error absolute value is the same or less than the position-
ing completed width (Pn522), and the reference after position reference filtering is 0.
2 Outputs when the position error absolute value is the same or less than the position-
ing completed width (Pn522), and the position reference input is 0.
Backlash Compensation Direction
0 Compensates with a reference in the forward direction.
1 Compensates with a reference in the reverse direction.
Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
4th 3rd 2nd 1st
digit digit digit digit
n.