Yaskawa Σ-V Series AC Servo Drives Rotational Motor MECHATROLINK-III - Manual (Page 37)

2.5 Parameters (Pn )
2-9
2
SigmaW
in+
3. Click one of the Set buttons located on the right of the parameter list.
The Parameters list box will appear.
4. Select a parameter to edit, and then click OK .
The Set Parameters box will appear again.
5. Click OK .
The Online Parameter Editing dialog box will appear again.
6. Click the setting arrows to change the value of the setting.
If an allowable range is specified, set the value within that range.
The value of the parameter in the SERVOPACK will immediately change to the new value.
MECHA