Yaskawa Σ-V Series AC Servo Drives Rotational Motor MECHATROLINK-III - Manual (Page 23)

1.3 SERVOPACK Ratings and Specifications
1-5
1
Outline
∗ Speed regulation by load regulation is defined as follows:
I/O
Signals
Sequence
Input
Input
Signals
which can
be allocated
Number of
Channels
3 ch
Functions
• Homing deceleration switch (/DEC)
• External latch (/EXT 1)
• Forward run prohibited (P-OT), reverse run prohibited
(N-OT)
• Forward external torque limit (/P-CL), reverse external
torque limit (/N-CL)
Signal allocations can be performed, and positive and
negative logic can be changed.
Sequence
Output
Fixed Output Servo alarm (ALM)
Output
Signals
which can
be allocated
Number of
Channels
3 ch
Functions
• Positioning completion (/COIN)
• Speed coincidence detection (/V-CMP)
• Rotation detection (/TGON)
• Servo ready (/S-RDY)
• Torque limit detection (/CLT)
• Speed limit detection (/VLT)
• Brake (/BK)
• Warning (/WARN)
• Near (/NEAR)
Signal allocations can be performed, and positive and
negative logic can be changed.
Communi-
cations
Function
Personal Computer
Communications (USB)
Supports SigmaWin+.
Based on the USB 1.1 standard (12 Mbps).
LED Display ALM (red), RDY (green), LK1 (green), LK2 (green), CON (green)
MECHATROLINK- III
Communications Setting Switches
DIP Switch (S1) Number of pins: Eight pins (Refer to 4.1.1 )
DIP Switch (S2) Number of pins: Four pins (Refer to 4.1.1 )
Analog Monitor
Number of points: 2
Output voltage:
± 10 VDC (linearity effective range ± 8 V)
Output through the analog monitor unit (model: JUSP-PC001-E), the connec-
tion cable (model: JZSP-CF1S06-A3-E), and the analog monitor cable
(model: JZSP-CA01-E).
Dynamic Brake (DB) Not supported.
Regenerative Processing Not supported.
Overtravel Prevention (OT) Deceleration to a stop or free run to a stop at P-OT or N-OT
Protective Function Overcurrent, overvoltage, overload, and so on.
Utility Function Gain adjustment, alarm history, JOG operation, origin search, and so on.
(cont’d)
Speed regulation =
No-load motor speed Total load motor speed
Rated motor speed
×
100%
-
M-III