Yaskawa Σ-V Series AC Servo Drives Rotational Motor MECHATROLINK-III - Manual (Page 255)

7.2 Viewing Monitor Displays
7-7
7
Monitor Displ
ays
(Un
)
7.2.5 Output Signal Monitor
To open the Output Signal Monitor box, use the following procedure.
1. In the SigmaWin+ main window, click Monitor - Monitor - Output Signal Monitor .
The Output Signal Monitor box will appear.
The items which can be monitored are listed.
2. Select the items to be monitored.
The current status of the selected item is shown in the Value column.
Hi indicates that the input signal is off and Lo indicates that the input signal is on. When no output signal
is allocated, Lo will be shown in the column.
MECHA
MECHA