Grass Valley K2 Storage System Instruction Manual v.3.3 - Manual (Page 513)

June 25, 2009 K2 Storage System Instruction Manual 513
Using the K2 Coder
Folder K2 bin. Doing so causes an import/export loop.
NOTE: Do not configure the same bin as both the Import Watch Folder bin and the
Export Watch Folder bin.
5. In the tree view under Target File, right-click the current preset and select Delete .
6. In the tree view under Target File click Add .
The Preset Editor opens.
7. Select the preset you want to use.
This preset specifies the format of the files as exported/transcoded out of the K2
system. Select one of default presets provided by the Coder software. Do not select
one of the default K2 presets provided by Grass Valley.
8. Click Update , OK and OK to save settings and close.
Using the K2 Coder
These instructions assume that you have configured the K2 Coder as directed by the
configuration procedures earlier in this section.