Configuring the second nh server for nl10r – Grass Valley K2 Storage System Instruction Manual v.3.3 User Manual
Page 398

398
K2 Storage System Instruction Manual
June 25, 2009
Chapter 8 Installing the Nearline 10 Storage System
Configuring the second NH server for NL10R
On NL10R systems, both NH K2 Media Servers are identical, with the exception that
only one server can be the active media file system server at any time. For this reason
the K2 System Configuration application embeds the configuration and start of the
On this page…
Do this…
File System Server
Configuration
This page checks on the
configuration of the server in
one of its main roles as a file
system server. The server
also functions as a file
system client, which is also
checked from this page.
Click
Check
. When the wizard reports that the configuration is correct,
click
Next
.
If you get a “The V: will not be available until this device is rebooted…”
message, you can safely continue with this procedure and follow the
instructions related to this message later in the procedure.
FTP Server Configuration
This page appears only if the
server has the role of FTP
server.
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard
Click
Finish
. The wizard closes. The server restarts. Wait until all
startup processes have completed before continuing.