Grass Valley K2 Storage System Instruction Manual v.3.3 - Manual (Page 456)

456 K2 Storage System Instruction Manual June 25, 2009
Chapter 13 GV Connect access for Final Cut Pro systems
2. Click the Configure button.
The Client Configuration wizard opens.
NOTE: If your system has a large number of iSCSI clients, you are prompted to
restart the K2 Media Server when you configure clients and cross the following
thresholds: 64 clients; 80 clients; 96 clients.
3. Enter the network name for the client device, as currently configured on the device.
If you have multiple client devices to configure, you should configure your highest
bandwidth devices first, as this ensures load balancing is correct.
4. For Storage Access, leave iSCSI selected.
5. Click Next .
The Xsan Licensing Information page opens.
6. Enter Serial Number, Registered To, and Organization text.
This is the license key information that you received with your Xsan license from
Apple.
7. Click Next .
The Software Configuration page opens.
This page checks the client device for required software.
8. Identify software installed on the client device and proceed as follows:
• If any software with Yes in the Required column reports as Not Installed, you
must install it on the client device. After installing the software, click Check
Software.
• If all software with Yes in the Required column reports as Installed, click Check
Software.