Grass Valley K2 Storage System Instruction Manual v.3.3 - Manual (Page 346)

346 K2 Storage System Instruction Manual June 25, 2009
Chapter 7 Installing the Level 30R Storage System
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring.
2. Click the Configure button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a Level 30R K2 Storage System, as
described in the following table. Some screens require no input from you, as they
are based on the configurations already completed on a previously configured K2
Media Server.
On this page… Do this…
Define server roles
Enter the name for the K2 Media Server. This should be the current
network name of the machine.
Select FTP server and NAS server.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a NH
K2 Media Server is as
follows:
• K2 Server
• File System Client
• QuickTime
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. After
installing the software, click
Check Software . When all required
software reports as Installed, click Next .