Grass Valley K2 Storage System Instruction Manual v.3.3 - Manual (Page 488)

488 K2 Storage System Instruction Manual June 25, 2009
Chapter 14 Administering and maintaining the K2 Storage System
Hardware wizard, install the driver on the second FC port as follows:
a. Select Install from a list or specific location . Click Next .
b. Select Don’t search. I will choose the driver to install . Click Next .
c. Select Have Disk .
d. Browse to C:\profile\drivers\LSI_SCSIPORT_1.21.25.00. Click Open and OK .
e. Start the driver install by selecting Next .
f. On the Hardware Installation page, click Continue Anyway .
g. Click Finish .
4. On the Found New Hardware wizard, install the first LSI Pseudo Device as
follows:
a. Select Install from a list or specific location . Click Next .
b. Select Don’t search. I will choose the driver to install . Click Next .
c. Select Have Disk .
d. Browse to C:\profile\drivers\LSI_SCSIPORT_1.21.25.00. Click Open and OK .
e. Start the driver install by selecting Next .
f. On the Hardware Installation page, click Continue Anyway .
g. Click Finish .
5. If the K2 Media Server has a dual port Fibre Channel card, on the Found New
Hardware wizard, install the driver on the second LSI Pseudo Device port as
follows:
a. Select Install from a list or specific location . Click Next .
b. Select Don’t search. I will choose the driver to install . Click Next .
c. Select Have Disk .
d. Browse to C:\profile\drivers\LSI_SCSIPORT_1.21.25.00. Click Open and OK .
e. Start the driver install by selecting Next .
f. On the Hardware Installation page, click Continue Anyway .
g. Click Finish .
6. Make the following registry settings:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Service
s\Lsi_fc\Parameters\Device]
"DriverParameter"="MPIOMode=2"
"MaximumSGList"=dword:000000ff
"NumberOfRequests"=dword:000000ff