beautypg.com

Grass Valley K2 Storage System Instruction Manual v.3.3 User Manual

Page 381

background image

June 25, 2009

K2 Storage System Instruction Manual

381

Setting up the Nearline 10 RAID chassis

chassis. There are no power buttons on Expansion chassis.

3. Release the power button when the Power Good LED on the power supply is

illuminated. This takes 1-3 seconds.

4. Wait while the primary RAID chassis performs self-test and initialization. This

takes about four minutes. While this is taking place, the RDY LED is illuminated
with a steady on light.

5. Watch for the RDY LED to begin blinking at one second intervals. The LED might

turn off and back on two times before starting the one second blink pattern. When
the RDY LED is blinking at one second intervals, the self-test and initialization is
complete and the chassis is ready for use.

Your preparations for Nearline 10 RAID storage are now complete.