Grass Valley K2 Storage System Instruction Manual v.3.3 - Manual (Page 426)

426 K2 Storage System Instruction Manual June 25, 2009
Chapter 11 Managing K2 software
About K2 software
Check K2 Release Notes for the latest information about software.
At the time of this writing, the primary software installations for the K2 Storage
System and K2 products are as follows:
In addition, the following software is installed in special cases:
• Multi-Path I/O software — You must install this software on a K2 Media Client
that has redundant paths to storage. This includes a K2 Media Client that is part of
a redundant K2 Storage System and a K2 Media Client directly connected via
redundant Fibre Channel connections to its own external RAID storage. Refer to
the K2 Media Client System Guide for more information.
This
software… Is distributed
on…
With the installation file located at…
Which is
installed on… And is described as
follows:
K2 Client The K2 System
Software CD ..\K2Client\setup.exe K2 Media
Clients Provides core functionality
for all K2 Media Client
models.
K2 Server The K2 System
Software CD ..\K2Server\setup.exe K2 Media
Servers Provides core functionality
for all K2 Media Servers in
all roles.
Control
Point The K2 System
Software CD ..\ControlPoint\setup.exe Control Point
PCs Provides remote control
and configuration of K2
Media Clients (both
internal and external
storage) as well as the K2
Storage System.
Media File
System
(SNFS) The K2 System
Software CD ..\snfs\gvSnfsxxSetupK2.bat K2 Media
Servers,
stand-alone K2
Media Clients,
and shared
storage (SAN)
K2 Media
Clients Install only as instructed by
release notes.
NetCentral The NetCentral
Manager CD ..\ServerSetup.exe The NetCentral
server PC (this
can be a
Control Point
PC) Provides remote
monitoring of all K2
products.