Grass Valley K2 Storage System Instruction Manual v.3.3 - Manual (Page 176)

176 K2 Storage System Instruction Manual June 25, 2009
Chapter 4 Installing the Level 20 Storage System
iSCSI Bridge Server
Configuration
This page manages the
components that bridge
between iSCSI (the GigE
media network) and the
Fibre Channel connection to
the RAID storage. You
configure network settings
on the iSCSI adapters and
the page validates that the
Fibre Channel adapter is in
place and that the media
RANKs are visible as iSCSI
targets.
Select an iSCSI adapter and click Modify . A network configuration
dialog box opens. Enter the media network IP address and the subnet
mask and click
Apply .
Do the same for the other iSCSI adapter.
Click
Check . The Validation Report opens.
Confirm that the iSCSI configuration is successful. Close the Validation
Report and then click
Next .
Database Server
Configuration
You do not need to enter or configure anything on this page.
Click
Next .
On this page… Do this…