K2 storage system cabling guide, Documentation cd-rom, On-line help systems – Grass Valley K2 Storage System Instruction Manual v.3.3 User Manual
Page 29
June 25, 2009
K2 Storage System Instruction Manual
29
K2 Storage System Cabling Guide
The cabling guides provide diagrams for storage system cabling and external
configuration, such as setting addresses on RAID devices. There is a cabling guide for
each pre-defined level of K2 Storage System. Each cabling guide covers both
redundant and non-redundant systems. You can find the cabling guide packaged with
the primary RAID storage chassis.
Documentation CD-ROM
Except for the release notes, the full set of support documentation, including this
manual, is available on the Documentation CD-ROM that you receive with your K2
Storage System. You can find the Documentation CD-ROM packaged with the RAID
storage chassis.
The Documentation CD-ROM includes the following:
•
K2 Storage System Instruction Manual
— Contains installation, configuration, and
maintenance procedures for shared storage options.
•
K2 Storage System Cabling Guide
— Contains diagrams for cabling the devices of
the K2 Storage System.
•
RAID Instruction Manuals
— There is an Instruction Manual for each type of RAID
storage device that can be a part of a K2 Storage System. These manuals contain
procedures for configuring and servicing the device.
•
K2 Media Client System Guide
— Contains the product specifications and
step-by-step instructions for modifying system settings. Includes instructions for
adding a K2 Media Client to the K2 Storage System.
•
K2 Media Client Quick Start Guides
— The Quick Start Guides provides step-by-step
installation instructions for basic installation and operation of the K2 Media Client,
including recording and playing clips.
•
K2 Media Client User Manual
— Describes the K2 Media Client and provides
instructions for configuring and operating the product.
•
K2 Media Client Service Manual
— Contains information on servicing and
maintenance.
On-line Help Systems
K2 Media Client Help
— You can access the on-line help through the AppCenter user
interface as follows:
• In the menu bar select
Help,
then choose
AppCenter Help Topics
from the
drop-down menu.
NetCentral Help
— From the NetCentral interface access on-line help as follows:
• For general help with NetCentral manager, select
Help | NetCentral Help Topics
.
• For help specific to monitoring K2 Storage System system devices, select
Help
| Device Providers
and then select the monitored device.