Grass Valley K2 Storage System Instruction Manual v.3.3 - Manual (Page 322)

322 K2 Storage System Instruction Manual June 25, 2009
Chapter 7 Installing the Level 30R Storage System
Example of Level 30R names and IP addresses
Setting up host tables
The hosts file is used by the control network and the streaming/FTP network to
determine the IP address of devices on the network when only a the device name
(hostname) is given. The steps that follow describe how to edit the hosts file located
at C:\Windows\system32\drivers\etc\hosts on Windows XP and Windows 2003
Computer
name Device type Streaming network
addresses Control network
addresses Media network
addresses Comments
root-server-1 K2 Media
Server 192.168.101.11
a
a.
This IP address must resolve to hostname root-server-1_he0
192.168.100.11 192.168.99.11 root-server-1 and
root-server-2 are
a redundant pair.
192.168.99.12
192.168.99.13
192.168.99.14
root-server-2 K2 Media
Server 192.168.101.21
b
b.
This IP address must resolve to hostname root-server-2_he0
192.168.100.21 192.168.98.21
192.168.98.22
192.168.98.23
192.168.98.24
root-server-3
(optional) NH K2 Media
Server 192.168.101.31
c
c.
This IP address must resolve to hostname root-server-3_he0
192.168.100.31 — This server has
roles of FTP
server and NAS
server only.
root-raid-1 RAID — 192.168.100.51 — Each RAID
controller is on
the control
network for
monitoring.
root-raid-2 RAID — 192.168.100.52 —
root-gige-1 GigE switch — 192.168.100.61 — —
root-gige-2 GigE switch — 192.168.100.62 — —
root-cppc-1 Control point
PC — 192.168.100.81 — —
root-client-1 iSCSI client — 192.168.100.111 192.168.99.111 For the control
network, one IP
address is shared
between the two
teamed ports. For
media networks,
subnet 99 is the
“A” network and
subnet 98 is the
“B” network.
192.168.98.112
root-client-2 iSCSI client — 192.168.100.121 192.168.99.121
192.168.98.122
root-client-3 iSCSI client — 192.168.100.131 192.168.99.131
192.168.98.132
root-client-4 iSCSI client — 192.168.100.141 192.168.99.141
192.168.98.142