Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 61)

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 61
Stratix 5100 Device Manager Configuration Startup Chapter 3
10. Click Apply to save your settings.
For additional radio configuration about the parameters, use these links:
•
Easy Setup Network Configuration Page on page 80
•
Network Interface Summary Page on page 87
Enable the Radio on the
Network In addition to setting the parameters on the Easy Setup page, you must go to the
radio settings page to enable the radio.
1. From the top menu, click Network.
The Network Summary page appears.
2. Click Network Interface.
3. Click Summary.
Aironet Extensions Choose Enable if there are only Rockwell Automation WAPs or Cisco Aironet devices
on your wireless LAN and the unit is operating as an access point or workgroup
bridge or if the unit is operating as a repeater.
Channel Channel 1-24xx
Least Congested
When you choose Least congested, the WAP makes the determination on it's own
which channel is best.
Power Maximum
5…23
Table 6 - Radio Configuration Settings
Parameter Description