Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 214)

214 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 6 Administering the WAP Access
Beginning in privileged EXEC mode, follow these steps to specify RADIUS
authorization for privileged EXEC access and network services:
1. Enter global configuration mode.
configure terminal
2. Configure the wireless device for user RADIUS authorization for all
network-related service requests.
aaa authorization network radius
3. Configure the wireless device for user RADIUS authorization to
determine if the user has privileged EXEC access.
The exec keyword can return user profile information (such as
autocommand information).
aaa authorization exec radius
4. Return to privileged EXEC mode.
end
5. Verify your entries.
show running-config
6. (Optional) Save your entries in the configuration file.
copy running-config startup-config
To disable authorization, use the no aaa authorization
{network | exec} method1 global configuration command.
Displaying the RADIUS Configuration
To display the RADIUS configuration, use the show running-config
privileged EXEC command.