Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 222)

222 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 6 Administering the WAP Access
The following is a configuration example from an access point configured for
Admin authentication by using TACACS+ with the auth cache enabled. While
this example is based on a TACACS server, the access point can be configured for
Admin authentication by using RADIUS:
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
!
username Cisco password 7 123A0C041104
username admin privilege 15 password 7
01030717481C091D25
ip subnet-zero
!
!
aaa new-model
!
!
aaa group server radius rad_eap
server 192.168.134.229 auth-port 1645 acct-port
1646
!
aaa group server radius rad_mac
server 192.168.134.229 auth-port 1645 acct-port
1646
!
aaa group server radius rad_acct
server 192.168.134.229 auth-port 1645 acct-port
1646
!
aaa group server radius rad_admin
server 192.168.134.229 auth-port 1645 acct-port
1646
cache expiry 1
cache authorization profile admin_cache
cache authentication profile admin_cache
!
aaa group server tacacs+ tac_admin
server 192.168.133.231
cache expiry 1
cache authorization profile admin_cache
cache authentication profile admin_cache
!
aaa group server radius rad_pmip
!
aaa group server radius dummy
!
aaa authentication login default local cache
tac_admin group tac_admin
aaa authentication login eap_methods group rad_eap