Rockwell Automation 1783-WAPxxx Stratix 5100 Wireless Access Point User Manual - Manual (Page 48)

48 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 2 Install the Stratix 5100 Wireless Access Point/Workgroup Bridge
Access Point Status Indicators
It is expected that there are small variations in color intensity and hue from unit
to unit. This is within the normal range of the status indicators manufacturer’s
specifications and is not a defect.
Figure 17 - Access Point Status Indicator
The status indicators communicate various WAP conditions.
Table 4 - Status Indicator Descriptions
Message Type Status Indicator Description
Boot loader status
sequence Blinking green DRAM memory test in progress
DRAM memory test OK
Board initialization in progress
Initializing nonvolatile memory file system
Nonvolatile memory test OK
Initializing Ethernet
Ethernet OK
Starting Cisco IOS
Initialization successful
Association status Green Normal operating condition, but no wireless client
associated
Blue Normal operating condition, at least one wireless client
association
32470-M
Status Indicator