ETC Eos v1.3 - Manual (Page 93)

5
Patch 79
Creating a New Fixture
New fixtures are created from the fixture creator list in the CIA (see above).
To create a new fixture, press {New}. A new fixture will be added to the bottom of the fixture list.
Name New Fixture
Once the new fixture appears in the list, it is recommended that you name the fixture you are about
to create.
To name a fixture in the creator list:
Step 1: Press [Page T ] to arrow down to the new fixture.
Step 2: Press {Type}. The virtual keyboard will open in the CIA.
Step 3: Enter the desired name for the new fixture on the virtual (or attached alphanumeric)
keyboard.
Step 4: Press [Enter]. The name will appear in the “Type” column for the new fixture.
Add parameters
After naming the fixture, you can specify which parameters the new fixture contains.