ETC Eos v1.3 - Manual (Page 237)

18
Creating and Using Effects 223
Effect Status Display
To view the effects currently running, you may press [Displays]>{Effect Status} to reveal the effect
status display in the CIA.
This display shows you any currently running effects and gives you the ability to edit the effect while
running. When an effect is selected, the encoders and encoder screen change to allow you to
manipulate the effect according to rate, size, horizontal form, vertical form, and axis.
For Example:
To edit an effect, select the effect using the command line.
• [Effect] [9] [0] [2] [Enter]
The encoder screen repaints so that the encoders now control the five attributes in the
columns of the effect status display:
• Rate - modifies cycle time. Default is 100% and can be modified from 0%-2000%.
• Size - modifies scale. Default is 100% and can be modified from 0%-2000%.
• Shape (Vertical or Horizontal as defined by the {Mode} button) - Default is 100% and
can be modified from 0%-2000%.
• Axis - Default is 0° and can be modified by +/- 180°.
Use the encoders or softkeys to adjust the effects while watching the effect on stage.
The effect itself can be accessed for editing from this display by pressing {Edit} - any changes made
directly in the live effect editor are made to the effect itself and must be stored. Cue level overrides
also must be stored or updated to the required cue, but do not impact the basic effect itself.