ETC Eos v1.3 - Manual (Page 198)

184 Eos Operations Manual
Move To
The {Move To} softkey is used to move cues from one location in a cue list to another location in the
same or even a different cue list. When cues are moved, values that had tracked will be matched to
the previous cue and will be auto-blocked by the system. The impact on subsequent cues is based
on track/cue only conventions.
The following example illustrates the use of the {Move To} softkey in the cue list index:
• [1] [/] [2] {Move To} [2] [/] [1] [Enter] - moves the selected cue 2 from cue list
1 to the new list 2. When a cue list is moved, any links that referenced the cue list are changed
accordingly.
Alternatively, you could use [Copy To] to copy the content of the cue to another cue or cue list.
Edit
The {Edit} softkey opens a blind channel view of the selected cue and changes focus from the cue
list index. You can change the blind display to spreadsheet or table view by pressing the [Format]
key. You can edit any of the cue attributes for the cue selected in the index, but the cue contents
must be edited in the blind display.
See “Recording and Editing Cues from Blind” on page 167.