ETC Eos v1.3 - Manual (Page 115)

7
Basic Manual Control 101
As long as channels are on the command line you can continue to address them with commands
without having to reselect them.
For Example:
• [1] [thru] [5] [Full] [Enter]
The selected channels are highlighted in gold, with white channel text and red intensity
values (indicating manual data). You may continue to modify channels 1 through 5 since
they are still selected and displayed on the command line.
• [-%] [-%]
This command would reduce the intensity of channels 1 through 5 by 20%. This command
is self-terminating.
• [at] [7] [5] [Enter]
You can continue manipulating the selected channels so long as the channels are selected and
displayed on the command line.
Level Wheel
You may set intensity for selected channels using the level wheel. Rolling the level wheel upwards
(towards the CIA) increases intensity. Rolling it downwards (towards you) decreases it. The level
wheel is a proportional control. Therefore differing intensity settings will maintain their relationship
to each other proportionally as the device adjusts the intensity.
For Example:
Assume the following intensity levels are set:
• Channel 1 @ Full
• Channel 2 @ 50
• Channel 3 @ 25
As the level wheel lowers intensity, when:
• Channel 1 is @ 50
• Channel 2 will be at 25
• Channel 3 will be at 12.5.
This proportionality is maintained with intensity increases as well.