Configuring submasters while programming – ETC Eos v1.3 User Manual
Page 256
242
Eos Operations Manual
Configuring Submasters While Programming
You can convert a fader to a submaster without configuring it in setup. If any submaster number is
on the command line, you can press [Load] for the fader and it will be loaded with that submaster if:
• the fader has no cue list loaded (and is assigned as a playback fader)
-or-
• the fader has no submaster data recorded to it (and is already defined as a submaster)
Regardless of the fader configuration in setup, if the above conditions are met, the fader can be
loaded with the submaster specified on the command line.
For Example:
Specify a sub on the command line.
•
[Sub] [5] [Enter]
Press the load button for an empty fader assigned as a playback.
•
[Load]
The sub will load to that fader.
To return that fader to its original configuration as a playback fader, you must reconfigure the fader
in setup (see
).