ETC Eos v1.3 - Manual (Page 303)

A
Eos Configuration Utility 289
Time Zone
The time zone the console is using. This is an offset from Greenwich Mean Time (GMT). Each
setting in the pull-down list displays the offset, the name of the time zone and a couple of cities in
that time zone.
Printer
This displays the currently selected printer type. The pull-down list will only display supported
printers.
Show Archive Path
This is the default location to save show files. The full path must be typed in and specified in a legal
Windows format. The default location is a folder on the D: drive.
If you decide to change this setting, it is recommended that you keep this location on the D: drive.
This will keep your show files safe during software updates that may include re-imaging the C:
drive.
Calibrate Touch Screens
This will launch a screen calibration utility to guide you through the process of re-calibrating the
touch screens. This should be used if the pointer is consistently offset from where you are touching
the screens.
Each screen is calibrated independently.
External Monitor Arrangement
If you plan on using a mouse, external monitors must be placed in a logical manner around the
console. This will dictate how and where the pointer moves from one screen/monitor to another.
Available Not Available
Click an available monitor
once to select it...
...Then click on a location
around the Eos console
to place it.
The number on the
monitors matches the
number of the video port
on the rear of the console.