ETC Eos v1.3 - Manual (Page 179)

11
Working with a Single Cue List 165
Using Cue Only/Track
The [Cue Only/Track] key can be used as an applied exception to the cue only/track system setting.
Therefore if the system is set to Cue Only, the key behaves as a [Track] command. Alternatively, if
the system is set to Track, the key behaves as a [Cue Only] button.
For more information on Tracking vs. Cue Only see Tracking vs. Cue Only, page 5 in Setup.
[Cue Only/Track] can be used in conjunction with record or update functions. Following are some
examples of use:
With system set to “Track”
• [Record] [5] [Cue Only] [Enter] [Enter] - rerecords cue 5. This will make the changes
to cue 5only. The changes will not track forward through the list.
• [-] [Color] [Record] [5] [Cue Only] [Enter] [Enter] - as above, but changes to color
parameters will not be included in the record and all data that was included will not track
forward. Color data in the cue remains unchanged.
• [Update] [5] [Cue Only] [Enter] - updates cue 5 with only those manual parameters
that were receiving their instructions from that cue. The changes will not track forward in the
list. Note that if the data being updated were referenced, this action updates the referenced
target as well.
• [-] [5] [Record] [7] [Cue Only] [Enter] [Enter] - rerecords the specified cue, except
the contributions from channel 5 The changes will not track forward in the list.
With system set to “Cue Only”
• [Record] [5] [Track] [Enter] [Enter] - rerecords cue 5. This will force the changes to
track forward in the list until the next move instruction or block.
• [-] [5] [Color] [Record] [7] [Track] [Enter] [Enter] - rerecords the specified cue,
except the color data from channel 5. The recorded changes will track forward in the list.
• [Update] [3] [thru] [7] [Track] [Enter] - updates cues 3 thru 7. Range updates are
subject to the normal rules of track/cue only in determining impact on subsequent cues.
N o t e : In the following examples, the commands [Cue Only] and [Track] indicate the
same key hit of [Cue Only/Track] - a single button on the keypad. The system
setting determines the actual context of the button.
For clarity, only the contextual function of the button is used in the examples.