ETC Eos v1.3 - Manual (Page 49)

3
System Basics 35
Color indicators
Eos uses color to indicate the selection state and information about channel/parameter levels.
Channel numbers/channel headers
Unselected Selected
• Black . . . . . . . . . . . . Unselected channel number.
• White . . . . . . . . . . . . Selected channel number or channel is parked.
• Gray header . . . . . . Unselected channel header.
• Gold outline . . . . . . Selected channel header.
Channel/parameter levels
• Red. . . . . . . . . . . . . . Manual Data (any data that has been set but not yet stored to an
active cue).
• Blue . . . . . . . . . . . . . The intensity value is higher than in the previous cue.
Non-intensity parameters (NPs) are in blue when any move
instruction has occurred.
• Green . . . . . . . . . . . . The intensity value is lower than in the previous cue.
Also used in reference marking to indicate a channel has just
marked.
• Magenta. . . . . . . . . . The recorded value is tracked, unchanged from a previous cue.
• White . . . . . . . . . . . . The value is blocked.
• Gray . . . . . . . . . . . . . Default or the value is a null value (from either {Make Null} or a
filter). When nulled, a gray “n” appears next to the value.