ETC Eos v1.3 - Manual (Page 50)

36 Eos Operations Manual
Text Indicators in live/blind
Please note examples of text indicators in the following graphic:
Color conventions listed above apply to text indicators as well. Therefore red indicates a manual
value that must be stored.
• _ . . . . . . . . . . . . . . . . Underlined value (white) indicates a system-applied block (also
called an auto-block).
• + . . . . . . . . . . . . . . . . Found in place of parameter data in summary view. Indicates
that not all parameters in that category are at the same value.
This indicator is found only in the summary view or in table views
when the parameters are collapsed into a category view only.
• A. . . . . . . . . . . . . . . . Indicates the channel or parameter is asserted.
• B. . . . . . . . . . . . . . . . Always red. Indicates the channel or parameter is manually
blocked (not an autoblock). This block must be stored.
• C. . . . . . . . . . . . . . . . Captured Channel
• I . . . . . . . . . . . . . . . . Channel is controlled by an inhibitive submaster
• IP, CP, FP, BP . . . . . Indicates that the value is referenced to a palette (Intensity,
Color, Focus, or Beam). This text is followed by a number,
indicating which palette is being referenced. This can be
substituted with the palette label if the “Show Reference Label”
setting is activated (see
Show Reference Labels, page 92 ).
“B”
“N”
“_” (underscore)
“t”
“A”
“+”
“R”
“CP6”
“MK”
“Q5”
“C”
“I”