Text indicators – ETC Eos v1.3 User Manual
Page 53
3
System Basics
39
Text indicators
•
+ . . . . . . . . . . . . . . . . indicates that there is discrete timing within the associated cue
•
* . . . . . . . . . . . . . . . . indicates the cue has an allfade command
•
A or a . . . . . . . . . . . . indicates an asserted cue. “A” indicates the entire cue is
asserted. “a” indicates a channel or parameter assert only.
•
B or b . . . . . . . . . . . . indicates a blocked cue. “B” indicates the entire cue is blocked.
“b” indicates a channel/parameter block only.
•
F1 - F10 . . . . . . . . . . indicate faders numbered 1-10 on the console.
•
F9 (see in cue 11) . . indicates a follow time associated with the cue (in this case,
9seconds).
•
H (see in cue 9) . . . . indicates the cue has a hold time.
•
H4 (see in cue 10) . . indicates a hang time associated with the cue (in this case 4
seconds).
•
L2 (on fader pg. 8) . . indicates a cue list number (in this case, list 2).
•
M or m . . . . . . . . . . . indicates a marked cue. “M” indicates an AutoMark or a
reference mark that is used by a subsequent cue. “m” indicates
a reference mark that is currently unused by any subsequent
cue (see
•
R (see in cue 8) . . . . indicates the source cue which refers back to an earlier mark
).
•
S2 (on fader pg. 1) . . indicates submaster number (in this case, sub 1).
Note:
For more details on information contained in the playback status display, see