ETC Eos v1.3 - Manual (Page 76)

62 Eos Operations Manual
Changing the Patch View
By default, patch is displayed in a sequential channel view. While in the channel patch view, any
numeric entry from the keypad is assumed to be a channel.
You may change this to a sequential address view by pressing the [Format] button. While in
address patch view, any numeric entry from the keypad is assumed to be an output address.
As it is possible to patch by either output address or port/offset, pressing the [data] key will toggle
the display to show the alternate output information.
N o t e : It is recommended that you use the patch by channel display when working with
moving lights or other multi-parameter devices.