ETC Eos v1.3 - Manual (Page 302)

288 Eos Operations Manual
Show Welcome Screen
When this is checked, the Eos console will boot into the Configuration Utility every time instead of
booting directly into the main Eos application.
General Settings
Device Name
This specifies the name this Eos console will use to identify itself on the network to other devices.
Time
The time the console is using. This can be set manually (direct data-entry) or via SNTP (Simple
Network Time Protocol) time service. Please see
Network Settings, page 290 for more information.
The time is displayed in a 24-hour format as HH : MM : SS.
Date
The date the console is using. This can be set manually (direct data-entry) or via SNTP (Simple
Network Time Protocol) time service. Please see
Network Settings, page 290 for more information.
The time is displayed as MM / DD / YYYY.
When you click on a field to change the
entry, an appropriate keyboard (numbers
only vs. full alpha-numeric) will pop-up to
provide a data-entry method even without a
keyboard connected to the console.
If you do have a USB keyboard attached, you
can use either keyboard for the data-entry.