ETC Eos v1.3 - Manual (Page 249)

19
Using Park 235
Parked Values in Live
Channels and parameters may be parked and unparked from the live display. Following are some
examples:
To park a channel, parameter, or group from live:
• [2] [At] [5] [0] [Park] [Enter] - parks channel 2 intensity at 50%
• [2] [Intensity] [Park] [Enter] - parks the intensity of channel 2 at its current value
• [2] [Park] [Enter] - parks all parameters of channel 2 at their current settings
• [2] [At] [Park] [Enter] - if channel 2 is unparked, this command parks intensity at the current
value. If the intensity for channel 2 is parked, this command unparks intensity.
• [Group] [2] [At] [Park] [Park] [Enter] - pressing [Park] twice is a toggle state and allows you
to park a complete channel list that currently has some channel intensities parked and some
unparked.
• [2] [Color Palette] [8] [Park] [Enter] - parks the color for channel 2 in color palette 8.
• [2] [Color] [Park] [Enter] - parks channel 2 color at its current value.
• [Cue] [6] [Park] [Enter] - parks all the channels stored in cue 6 at their levels provided in the
cue.
• [Park] [Enter] - clears all parked channels and scaled park instructions (see Scaled Parked
Values in Live, page 236 ). When a channel is unparked, it reverts to the level the console is
currently providing, or its default value if there is no current instruction.
N o t e : If a channel list is constructed in which some channels are parked and some are
unparked, [Park] [Enter] will unpark them all.