ElmoMC Multi-Axis Motion Controller-Maestro - Manual (Page 289)

D.2 Common Zone Errors
D.2.1 Root-level Error Codes:
0001 - Unknown Error;
0002 - Unable to create instance;
0003 - Unable to create interface;
0004 - Variable Redefinition;
0008 - Invalid Variable Type;
0009 - Invalid Input Parameter;
0010 - Invalid Output Parameter;
0011 - Invalid MACoM Initialization; (CAN Communication server unavailable)
0012 - Invalid Resource File;
0015 - Invalid CAN Bus Number;
0017 - Invalid CAN Bus Device;
0018 - Invalid Node Number;
0021 - Invalid Axis Number;
0024 - Invalid Vector Number;
0025 - Invalid Vector Initialization;
0027 - Invalid Group Number;
0028 - Invalid Group Initialization;
0033 - The SYNC Mechanism should be started; (Unable to work without Syncs)
0035 - Can't copy file to RAM;
0037 - Invalid trajectory file;
0038 - PVT initialization failed;
0039 - PVT deinitialization failed;
0040 - Invalid trajectory;
0042 - Can't create file;
0044 - Invalid DS402 Operation Mode;
0045 - Invalid device control sequence;
0046 - The command is not supported by DS402;
0086 - Sync Event Producer failed;
0097 – The PVT Mechanism should be initialized;
D.2.2 Root-level Warning Codes:
0005 - Variable not found;
0043 - Maestro Kernel has received debug command;
D.2.3 Top-level Error Codes:
0006 - Invalid Variable;
0007 - Invalid Variable Information;
0013 - Invalid Maestro Initialization;
0014 - Invalid CAN Bus;
0016 - Invalid CAN Bus Initialization;
0019 - Invalid Node Initialization;
Maestro Software Manual Appendix D: Maestro System Errors
MAN-MASSW (Ver. Q)
D-2