ElmoMC Multi-Axis Motion Controller-Maestro - Manual (Page 214)

Maestro Software Manual Ethernet/IP Communication
MAN-MASSW (Ver. Q)
11-12
Figure 11-17: Add Assembly Dialog with Members' Collection
7. Press on the New* field in the Assembly Members' table for member parameter
definitions: name, ID and type. If BITARR (bit array) is selected, enter the size of the
array in bits. Offset is calculated automatically.
8. Press OK to add the current Assembly to Workspace
To remove the Assembly, use the context menu shown below in Fig. 11-17.
Figure 11-18: Remove Assembly
11.5.2.2 Using syntax
11.5.2.2.1 Command interpreter
Get Assembly member syntax is
[Assembly Name] . [Member Name]
[Assembly Name][Member Index]
For example:
>assembly1.Param00
>10
> assembly1[2]
>10