ElmoMC Multi-Axis Motion Controller-Maestro - Manual (Page 13)

Maestro Software Manual Introduction
MAN-MASSW (Ver. Q)
1.2 Supplementary Documents
This manual is part of a documentation set that, together, can be used to set up and
program the motion of any machine whose motors are controlled by Elmo
SimplIQ servo
drives. Before you can use this manual you will need to carefully follow the instructions
in the Maestro Installation Guide to set up your Maestro.
The software described in this manual is provided on the CD that accompanies the
Maestro or as a download from Elmo's web site. In this manual it is assumed that you
have followed the software setup instructions in the Maestro Installation Guide and have
successfully installed the software.
At least one drive needs to be connected to the Maestro in order for it to function as a
motion controller. The
SimplIQ manuals shown below explain how to set up and program
servo drives. Please read the Installation Guide that arrived with your servo drive before
setting it up. Servo drives are power devices so be careful.
SimplIQ
Digital Servo Drive
Installation Guide(s)
Composer User Manual
CANopen Implementation Guide
SimplIQ Software Manual
SimplIQ Command Reference Manual
Maestro
Setup
Maestro
Programming
Drive
Setup
Drive
Installation
Drive/Axis
Programming
Tuba
Cornet
Maes
tro
Maestro
Installation Guide
Maestro
Software Manual
Figure 1-2: Elmo Documentation Hierarchy
1-2