Konica Minolta FK-502 - Manual (Page 91)

C650 2-49
To send a fax 2
When fax multi line is not installed
When fax multi line is installed
6
Touch [OK] and then touch [Close] on the next screen.
Overseas TX is set and the machine returns to the Fax/Scan screen.
– International dialing codes can be registered together with telephone numbers in the Address Book
and Program destinations. Refer to "Registering the Address Book" on page 9-3 for registering
abbreviated destinations, and refer to "Registering Program destinations" on page 9-14 for
registering Program destinations.
7
Specify other settings if required.
– For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
8
Dial the international telephone service code, followed by the recipient’s country code, area code and
recipient’s fax number.
– International telephone service codes differ by telephone company. Enquire directly with telephone
companies regaridng international telephone service codes.
9
Press [Start] key.
– If the fax cannot be sent because the recipient’s line is busy, the recipients number is redialed. For
details regarding redialling, refer to "When unable to send fax" on page 2-31.
– For aborting transmission, refer to "Aborting transmission" on page 2-36.
– If you are unable to send a fax, refer to "Fax cannot be sent" on page 4-2.
Transmission begins.