Konica Minolta FK-502 User Manual

Page 89

C650

2-47

To send a fax

–

Touch [No] to release timer transmission settings.

Touch [OK] twice, and then touch [Close].

Timer TX is set, and the machine returns to the Fax/Scan screen.

Specify other settings if required.

–

For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.

–

For details on Original Settings, refer to "Original Settings" on page 6-3.

–

For details on Communication Settings, refer to "Communication Settings" on page 6-4.

Specify the destination.

–

For details regarding specifying destinations, refer to "Specifying only one destination" on
page 2-13.

Press [Start] key.

–

If the fax cannot be sent because the recipient’s line is busy, the recipients number is redialed. For
details regarding redialling, refer to "When unable to send fax" on page 2-31.

–

For aborting transmission, refer to "Aborting transmission" on page 2-36.

–

If you are unable to send a fax, refer to "Fax cannot be sent" on page 4-2.

The scanned original is stored in memory as a reserved original and transmission is started at the
specified time.

This manual is related to the following products:

bizhub C650