Konica Minolta FK-502 - Manual (Page 87)

C650 2-45
To send a fax 2
8
Touch [Total # of Pages (Quick Memory TX)].
9
Enter the original count using the keypad and then touch [OK].
– Touch [No] to release the settings
10
Touch [OK].
The original page count is set and the machine returns to the Fax/Scan screen.
11
Specify other settings if required.
– For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
12
Specify the destination.
– For details regarding specifying destinations, refer to "Specifying only one destination" on
page 2-13.
13
Press [Start] key.
– If the fax cannot be sent because the recipient’s line is busy, the recipients number is redialed. For
details regarding redialling, refer to "When unable to send fax" on page 2-31.
– For aborting transmission, refer to "Aborting transmission" on page 2-36.
– If you are unable to send a fax, refer to "Fax cannot be sent" on page 4-2.
Transmission begins.