Konica Minolta FK-502 - Manual (Page 229)

C650 10-9
Utility mode 10
Administrator Settings > Fax Settings > Function Settings > Forward TX Setting
Set whether or not to use the Forwarding fax function. (page 10-55)
Administrator Settings > Fax Settings > Function Settings > Incomplete TX Hold
Whether or not to save the original which was not able to be transmitted even after redialling because of
communication error or because the recipient’s line was busy, in a resending box is set. (page 10-58)
Administrator Settings > Fax Settings > Function Settings > PC-FAX RX Setting
Whether or not to use the PC-FAX RX function is set. (page 10-60)
Administrator Settings > Fax Settings > Function Settings > TSI User Box Setting
A function that sorts the received original by TSI information of received fax. (page 10-63)
Item Description Values that can be set
Forward TX Setting Set whether or not to use the Forward TX Set-
ting. When set to [Yes] output function and
forwarding destination are set.
Forwarding box is a function that forwards
the received original to other party specified
in advance. Yes/No*
Following settings are specified
when set to [ON].
Output Method: Forward &
Print/Forward & Print (If TX Fails)
Forwarded destination settings
Select line settings
Item Description Values that can be set
Incomplete TX Hold Whether or not to save the original which was
not able to be transmitted even after redial-
ling because of communication error or be-
cause the recipient’s line was busy, in a
resending box is set. Yes/No*
When set to [ON] file storage dura-
tion is set from 12 Hours/
24 Hours/ 48 Hours/ 72 Hours.
Item Description Values that can be set
PC-FAX RX Settings Whether or not to use the PC-FAX RX func-
tion is set.
When set to [Allow], reception output desti-
nation is set.
PC-FAX RX means the received document
file is stored in the box on the hard disk.
When the PC-FAX reception setting is [Allow],
the settings like whether to print the original
or not and password check after the recep-
tion are possible. Allow/Restrict*
When set to [Allow], settings are as
follows.
Receiving User Box Destination:
Memory RX User Box*/Specified
User Box
Print: ON/OFF*
Password Check: ON/OFF*
Item Description Values that can be set
TSI User Box Setting A function that sorts the received origi-
nal by TSI information of received fax.
The operation when the original is re-
ceived by unregistered TSI information,
is set. Yes/No*
Following settings are specified when
set to [Yes].
Setting when corresponding box is not
there: Automatically Print*/ Memory RX
User Box
Print: Yes/No*
TSI User Box Registration