beautypg.com

Default scan/fax settings – Konica Minolta FK-502 User Manual

Page 239

background image

C650

10-19

Utility mode

10

10.6

Setting initial setting value of fax function (Default Scan/Fax Setting)

Initial setting value of Fax/Scan function can be set.

Fax/Scan function selected when main power supply is turned on or [Reset] key is pressed, can be set.

Default Scan/Fax Settings: Current Setting/Factory Default*

-

[Current Setting]
Each item set on the touch panel is registered as initial setting of Fax/Scan function before entering on
the Utility mode.

-

[Factory Default]
The Factory Default is registered in initial setting of Fax/Scan function.

* is a default value at the time of procurement.

2

Note

For this setting, display the Fax/Scan screen and then press the [Utility/Counter] key.

Default Scan/Fax Settings

1

Display the User Settings screen as described in "Displaying User Settings screen" on page 10-2.

2

Touch [Scan/Fax Settings].

Some items may not be displayed according to setting options.

In the Utility mode, the number displayed on button can be entered and selected with the keypad.
In case of [Scan/Fax Settings], enter [4] with the keypad.

3

Touch [Default Scan/Fax Settings].

This manual is related to the following products: